DIN 6799 Retaining Washer Carbon Steel Lock Washer Black Locking Circlips for Shafts

Description

DIN 6799 retaining washer is used for the machine, equipment, shaft groove or slot, the block to play on the axis or hole on the part of the role of moving around. Ever Hardware provides custom made fasteners and customizable packaging.
A retaining ring is a fastener that holds components or assemblies onto a shaft or in a housing/bore when installed in a groove. Once installed, the exposed portion acts as a shoulder that retains the specific component or assembly. Circlips are a type of retaining ring. Self-locking retaining rings may be installed in applications where there is no groove. Retaining rings are typically made from carbon steel, stainless steel or beryllium copper and may feature a variety of finishes for corrosion protection depending on the type of environment in which they are used.
Tapered section retaining rings decrease symmetrically from the center to the free ends, remaining circular when contracted or expanded within the limits of normal use. This assures contact with the groove along the entire periphery of the ring. These rings may be installed axially (horizontally along with the center point of an axis) or radially (externally along the radius of a circle). Depending on the size of the ring in question, it may be manufactured in one of two ways:
For smaller rings: using a die and stamping on a press from a coil of steel or copper
For larger rings: wire forming, in which rectangular wire is coiled into the shape of the ring.

DIN 6799 retaining washer circlip (a portmanteau of circle and clip), also known as a C-Clip, Seeger ring, snap ring or Jesus clip, is a type of fastener or retaining ring consisting of a semi-flexible metal ring with open ends which can be snapped into place, into a machined groove on a dowel pin or other part to permit rotation but to prevent lateral movement.