M8 PVC Countersunk Head Screws DIN 965 Corrosion Resistant Polyvinyl Chloride Phillips Cross CSK Machine Threaded Plastic Flat Bolts Gray Color Anti Acid Alkali Lightweight Insulated Fasteners

$95.99$205.99

  • Price for 1,000pcs
  • Delivery within five days
  • For Non-standard products please go to ever-hardware.com

Description

M8 PVC countersunk head screws have a uniform diameter the entire length of the shaft as opposed to tapered screws that have a pointed tip. A countersink is a conical hole cut into a manufactured object, or the cutter used to cut such a hole. A common use is to allow the head of a countersunk bolt or screw, when placed in the hole, to sit flush with or below the surface of the surrounding material (by comparison, a counterbore makes a flat-bottomed hole that might be used with a socket-head capscrew). A countersink may also be used to remove the burr left from a drilling or tapping operation thereby improving the finish of the product and removing any hazardous sharp edges. Ever Hardware provides precision M8 PVC countersunk head screws and customizable packaging.

PVC has high hardness and mechanical properties. The mechanical properties enhance with the molecular weight increase but decrease with the temperature increasing. The mechanical properties of rigid PVC (uPVC) are very good; the elastic modulus can reach 1500-3,000 MPa. The soft PVC (flexible PVC) elastic limit is 1.5–15 MPa.
The heat stability of raw PVC is very poor, so the addition of a heat stabilizer during the process is necessary in order to ensure the product’s properties. Traditional product PVC has a maximum operating temperature around 140°F (60°C) when heat distortion begins to occur. Melting temperatures range from 212°F to 500°F (100°C to 260°C) depending upon manufacture additives to the PVC. The linear expansion coefficient of rigid PVC is small and has good flame retardancy, the limiting oxygen index (LOI) being up to 45 or more. The LOI is the minimum concentration of oxygen, expressed as a percentage, that will support combustion of a polymer and noting that air has 20% content of oxygen. M3 PVC pan head screws are widely used on pipes/electric cables/construction/signs/clothing/furniture/healthcare/flooring/wire rope etc.

Diameter M8
Thread Pitch 1.25mm
Head Type Countersunk/CSK
Drive Type #4 Phillips
Material PVC
Head Diameter 15.4-15.8
Head Angle 90 Degrees
Screw Type Machine Screw
Finish Plain

M8 PVC Countersunk Head Screws DIN 965 Corrosion Resistant Polyvinyl Chloride Phillips Cross CSK Machine Threaded Plastic Flat Bolts Gray Color Anti Acid Alkali Lightweight Insulated Fasteners

Additional information

Weight N/A
Length

12mm, 16mm, 20mm, 30mm, 35mm, 40mm, 50mm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Title

Go to Top