PVC Flat Washers DIN 125 Corrosion Resistant Polyvinyl Chloride Resin Gasket Plastic Poly Gray Color Anti Acid Alkali Panels Lightweight Insulated Fasteners

$61.99$344.99

  • Price for 1,000pcs
  • Made In China Mainland
  • Delivery within five days
  • For Non-standard products please go to ever-hardware.com

Description

PVC flat washers are a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a screw or nut. Other uses are as a spacer, spring (Belleville washer, wave washer), wear a pad, preload indicating a device, locking device, and to reduce vibration (rubber washer). Washers usually have an outer diameter (OD) about twice larger than their inner diameter (ID). Washers are usually metal or plastic. High-quality bolted joints require hardened steel washers to prevent the loss of pre-load due to Brinelling after the torque is applied. Ever Hardware provides precision PVC flat washers and customizable packaging.
PVC has high hardness and mechanical properties. The mechanical properties enhance with the molecular weight increase but decrease with the temperature increasing. The mechanical properties of rigid PVC (uPVC) are very good; the elastic modulus can reach 1500-3,000 MPa. The soft PVC (flexible PVC) elastic limit is 1.5–15 MPa.
The heat stability of raw PVC is very poor, so the addition of a heat stabilizer during the process is necessary in order to ensure the product’s properties. Traditional product PVC has a maximum operating temperature around 140°F (60°C) when heat distortion begins to occur. Melting temperatures range from 212°F to 500°F (100°C to 260°C) depending upon manufacture additives to the PVC. The linear expansion coefficient of rigid PVC is small and has good flame retardancy, the limiting oxygen index (LOI) being up to 45 or more. The LOI is the minimum concentration of oxygen, expressed as a percentage, that will support combustion of a polymer and noting that air has 20% content of oxygen. M3 PVC pan head screws are widely used on pipes/electric cables/construction/signs/clothing/furniture/healthcare/flooring/wire rope etc.

DIN 125A ISO 7089
Diameter M3 to M20
Size As Standard
Type Flat
Chamfer None
Material PVC
Specification DIN 125
System of Measurement Metric
Place of Origin China Mainland
Finish Plain

PVC Flat Washers DIN 125 Corrosion Resistant Polyvinyl Chloride Resin Gasket Plastic Poly Gray Color Anti Acid Alkali Panels Lightweight Insulated Fasteners

Additional information

Weight N/A
Size

M3, M4, M5, M6, M8, M10, M12, M14, M16, M20

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Title

Go to Top